free roll cage material

here's a thought:
some people(maybe more than half) in this type of hobby like to do everything by the book, by the science, by the math, and by the chance that
1:100,000,000 chance is too much to risk.

Yeah, to hell with proper design. Let's bubblegum and duct tape this shit!
 
Honesty idk why anyone trys to talk to fuller. Doesn't matter what advise you give him, how you say it nice or not. Or give him solid advise he won't listen. I hate to say it but until he has a major failure of some kind he won't change or try to listen and understand what others are saying. I honestly hope I'm not there the day that this happens because I think it will take a major under taking to get him out. I just hope he doesn't have a bad roll over.
 
because I think it will take a major under taking to get him out. I just hope he doesn't have a bad roll over.
I do my best to avoid as much "off camber" stuff as possible (kinda why I haven't rolled in 15yrs since that drunk driving mishap) cause I've never been fond of seeing roll overs so I've have tried my hardest to avoid them but now that I'm getting into little more crazier wheeling (for me at least), seems time to have some swort of extra support/backup/cage/protection for added security.
 
Yeah, to hell with proper design. Let's bubblegum and duct tape this shit!
careful now might take that advise too literally and use duct tape as my harness...that could be interesting.
 
You gonna put a doubler in this one, give that heavy beast a good crawl ratio?
 
You gonna put a doubler in this one, give that heavy beast a good crawl ratio?
Howd you guess lol. Yep I'm currently working on designing my own doubler setup as soon as i find a way to make the shafts and mate them together....I'm saving that for when it's actually done and then I will post up the details and specs....bet ya can't wait for that "homemade project" but it will be done and it will work...I'm very determined and been drawing this out and researching this a lot and am very close to having it complete
 
Well there it is.

That's how long it takes for this to turn into the exact same John fuller thread.

These are the same posts and same bullshit as every time before.

All bs aside, I like it better without all this shit and mis-information in the public eye.

It concerns me that a newb somewhere is reading this, seeing the pics and thinking that the JF way is even remotely close to acceptable.

A 110v welder with .035 wire can't weld 1/2 single pass.

JF, pm me your address, I will send you some plates to weld up, and a return label and instructions.

Weld them up and send them back to me.

It's time to put up or shut up.

I'll properly cut the plates and test them destructively.
 
Weld them up and send them back to me.
fine but you gotta wait till i burn up this big role of .30 i just put in week ago cause i ain't cutting it to waste that wire but when i run out i will buy one small roll of .35 and be happy to weld your little 1/2"plates. I'm not sure what kind of testing you do (i think i remember you have machinery that does it) but I'm sure you will find a way to make a fool out of me but I can only speak for myself and several customers who have been very happy and successful with my work..including welding. Having this said, remember too welding a 1/2"plate for trailer hitch doesn't say much since trailer hitch doesn't have nothing of load on it compared to say a roll over down some crazy trail so i never claimed to weld thick steel for roll over crazy stuff but i merely stating that it's very doable with single pass too to hold up for your average DD, trailer hitch, some bracketry for normal use. any other uses than this and no, i take my stuff to a shop with 220 for peace of mind.
 
@GotWood :D can you believe what we are reading? Should we tell him?....
You do it..I'm laughing too hard.
In total defence of bubblegum and duct tape...... Sorry, I'm laughing to hard...... We won a ECORS race with a truck held together with duct tape and bubble gum. Seriously. The whole damn race!

The whole story is great, involved the jaws of life and a firefighter training session!
 
In total defence of bubblegum and duct tape...... Sorry, I'm laughing to hard...... We won a ECORS race with a truck held together with duct tape and bubble gum. Seriously. The whole damn race!
uhhhmm are you like serious or is this another joke
 
ohh and if i do weld trailer hitch stuff with that thick of steel...yes i know to make double pass. i'm not a complete moron, maybe just a little crazy
100% honest, so help me God, swear on my momma's grave, cross my heart!
well then i guess if it's true, i'm not the only "ghetto fabulous" builder after all.
 
In total defence of bubblegum and duct tape...... Sorry, I'm laughing to hard...... We won a ECORS race with a truck held together with duct tape and bubble gum. Seriously. The whole damn race!

The whole story is great, involved the jaws of life and a firefighter training session!
And several family and friends with mouths full of hubba bubba.
 
And several family and friends with mouths full of hubba bubba.

I can just picture in my head all family members on the sidelines chewing bubble gum furiously trying to help you guys out lol
 
ok now it seems that it's a joke...ha ha ha
 
In total defence of bubblegum and duct tape...... Sorry, I'm laughing to hard...... We won a ECORS race with a truck held together with duct tape and bubble gum. Seriously. The whole damn race!

The whole story is great, involved the jaws of life and a firefighter training session!
Is that the flats race that every bump you hit, the seat belts got tighter???? Lol
 
speaking of the Flats races, it's a dang shame there won't be any Mud Bog racing this year...I'm bummed out. I was having so much fun with it
 
Is that the flats race that every bump you hit, the seat belts got tighter???? Lol
No, that was due to previous poor design before I was involved. I fixed that problem and we ran with no problems for 2 seasons. Duct tape and bubble gum were not used in that particular instance.

My fu%$ing shoulders and neck were sore for a week!
 
No, that was due to previous poor design before I was involved. I fixed that problem and we ran with no problems for 2 seasons. Duct tape and bubble gum were not used in that particular instance.

My fu%$ing shoulders and neck were sore for a week!
My neck and back still hurt from the bubble gum and duct tape in the pass seat in the spartanburg race!!!!
 
until he has a major failure of some kind he won't change or try to listen
to correct you sir...everyone told me my D30 wouldn't last at the Flats very long...they were right about that one thing and i listened and bought "what most have told me" little better axles with better gearing so i did listen to that...plus it got really old very quick breaking 2 axles per ride on average (dam Ol Stumpy going down on the next trip)
 
ask several customers..one who has been towing his fith wheel for ohh....6years now and that fith wheel plate holding up perfect...2.should've seen Madjeepj10 pound his MJ face first down Laurel lane after loosing his brakes at the top and HOLY HELL...factory brackets ripped off axles and body and guess what...ALL my links, brackets and such on unibody and axles held up perfect with NONE stress cracks.

the sch40 stuff:.. might "dent" a little quicker than DOM but will hold up....especially when braced properly which mine isn't yet but it's close enough for now

yes i can build hitches, cages, arms, brackets, crossmembers and i can even properly weld to axle housings...

I can only speak for myself and several customers who have been very happy and successful with my work..including welding.

Speak for yourself, but I hope to God Almighty that any of your past or future "customers" know that your attitude is "close enough for now." My emphasis added to the above.

Also, anyone advertising 4x4 related services must be a vendor to pimp their services. :flipoff2:
 
Back
Top